|
Keller Products, Inc.
| 1800-352-8422
(978) 264-1911
| Fax (978) 264-0221
www.KellerFilters.com
|
Tramp Oil Skimmers For Single Sumps |
A KELLER TKO PUMP/SKIMMER RAPIDLY SWEEPS OUT
TRAMP OIL, CLEANS AND AERATES THE ENTIRE SUMP
|
Get these benefits:
- Extended tool life, improved parts finish
- Smoke & odor eliminated
- Multiplied coolant life = Much less machine downtime,
greatly reduced coolant purchase & disposal costs
With these exclusive Keller advantages:
Superior tramp oil separation - The Keller patented
permanent oil separating (coalescing) element provides extraordinary
surface area in a small package, providing excellent oil splitting
in a compact design.
Rugged construction - By using only 1/2" air-driven
pumps, Keller has eliminated the numerous operating and reliability
problems associated with electrical pumps or smaller air diaphragm
pumps.
Ease of setup and operation - A TKO unit ships UPS
in one box, and setup time is about 15 minutes. Only a 1/4"
compressed air line is required to run the unit. Minimal operator
attention is needed.
Inexpensive - Even including the 1/2" air pump,
the unique Keller TKO compact design is 30% to 50% less costly
than other comparatively equipped systems.
How the TKO Pump/Skimmer works:
The self-priming air operated pump pulls the tramp
oil/coolant mixture from the surface of the sump through the
floating inlet device, then through a cartridge filter which
removes any chips from the fluid. The oil/coolant mixture
is then pumped through the patented Keller all-plastic
separator element immersed in a separator tank. The
cleaned coolant continuously returns to the sump. The oil
layer collects on the top of the separator tank and is
occasionally drained into a waste oil container, simply by
opening the oil drain valve. No other operator attention is
required.
|
|
|
|
Model TKO-10.
Footprint (all models)-14" x 14"
|
|
|
|
TKO-6 mounted on machine tool
with
CLO-1 "Cling-On" magnetic frame.
|
|
|
|
The optional bag filter conveniently
removes a large quantity of floating chips before the
oily coolant is pumped to the separator tank.
|
| DISTRIBUTORS: |
TKO Separators are a featured Distributor product line.
|
|
|
Specifications and Ordering Information
| Selecting
and Installing a TKO Separator:
Three models of TKO Separators are offered, to satisfy
any combination of sump size, oil loading, and coolant
characteristics. [Selection criteria listed in table
below] Each TKO Separator is shipped by UPS
complete, ready for setup. The customer supplies only
a 1/4" compressed air line. The unit may be set on the
floor adjacent to the sump, or hung on the machine tool
using the CLO-1 magnetic frame (see photo). |
|
|
|
| Ordering Designation: |
TKO-6 |
TKO-10 |
TKO-14 |
| For Sump Sizes |
Medium |
Large |
Large |
| Tramp Oil Loading |
Moderate |
Heavy |
Very Heavy |
| Oil Rejection Rate of Coolant |
Efficient |
Slow |
Slow |
| |
| Price |
| Price |
$1095.00 |
$1195.00 |
$1295.00 |
| |
| Specifications |
| Footprint |
14" x 14" (All Models) |
| Height |
24" |
30" |
36" |
| Weight |
39 lbs |
47 lbs |
55 lbs |
| Compressed air requirements |
0.5 SCFM @ 20 to 125 psig |
| Electricals |
None (All Models) |
|
|
| |
| Accessory Items (All
Models) |
| |
|
Price |
| “Cling-On” frame with magnets, to mount TKO-6 to side of machine tool |
CLO-1 |
$225.00 |
| Replaceable filter element, 150 micron, 10" long |
R10-3150 |
$5.95 each |
| Optional Bag Filter, with 5 filter bags |
BA-0475 |
$795.00 each |
| Pack of 5 25 micron filther bags for BA-0475 |
RAP-25 |
$35 per pack |
| |
Additional Inlet Devices
(one #555-07 supplied
with each unit): |
| Compact floating inlet device |
#555-05 |
$90.00 |
| Fixed inlet device (Requires only 3" diameter access hole) |
#555-06 |
$90.00 |
| Floating inlet device |
#555-07 |
$110.00 |
|
|
|
|
