In-Line Coolant Filters

IN-LINE FILTERS WITH PERMANENT ELEMENTS
PREVENT PLUGGING OF COOLANT DELIVERY SYSTEMS

In-line filters protect to-the-spindle, through-the-spindle and through-the-tool coolant systems, preventing tool breakage & machine shutdowns
Keller permanent cleanable filter elements never need replacement
Keller filters are easily installed in-shop in the coolant lines

New Coolant Delivery Systems Require New Filters!

Filters with Keller's unique permanent cleanable filter elements feature:

High flow rate--One 10" element can handle 25 gpm
Keller permanent filter elements have superior solids holding capacity, far better than screens or disposable filters.
Available with stainless steel housings rated at 300 psig
Compact design, easy to install on any machine
Inexpensive to purchase, no replaceable parts
Ideal for shops, machine tool distributors & OEMs

Please see below for description of Keller permanent cleanable filter elements.

Selecting the Keller Coolant Filter
Keller supplies stainless steel filter housings with permanent cleanable filter elements for port sizes from 3/4" to 2" and coolant flow rates as high as 150 gallons per minute. Select the filter with the same port size as the size of the line on which it will be installed. For coolant delivery systems with 3/4" line size and flow rates of 25 gallons per minute of less, select XS075-2130 . For 1" line size and flow rates of 50 gallons per minute or less, select XS102-2130.

XS 075-2130 installed in Haas EC-300 coolant delivery system.
See below for other installation photos.

Note: Washable filter elements cannot be used for filtration of cutting oil.
Click here for In-Line Bag Filters for filtration of cutting oil.

Specifications and Ordering Information

Ordering Designation:	XS075-2130	XS102-2130	S205-2130
PRICES	$495.00	$695.00	$2475.00
Flow capacity, gal/min	25 gpm	50 gpm	150 gpm
Inlet/Outlet Ports	3/4" NPTF	1" NPTF	2" NPTF
Materials of Construction	304SS	304SS	304SS
Maximum Pressure	300 psig	300 psig	150 psig
Number of Filter Elements	1	1	4
Length of Filter Elements	10"	20"	20"
Designation of Filter Element	R10-2130	R10-2130	R10-2130
Filtration Efficiency	100 micron (1)---------------------------------------------------------------------------------------------
Note (1): Other permanent filter elements available -- 400 micron, 200 micron, 50 micron
Replaceable filter elements available as fine as 1 micron
Optional Inlet & Outlet Pressure Gages: Designation - #22-705, Price $20.00 each
See below for description of Keller permanent cleanable filter elements.

DISTRIBUTORS:

In-line Coolant Filters are a featured Distributor product line.

Click here for information

Keller Permanent Cleanable
Filter Elements

Keller proprietary cleanable filter elements are constructed of thin plastic discs with precisely sized grooves, mounted on a plastic core. The large internal filter surface area provides high flow at low pressure drop and long runs between cleanings. When cleaning is required, remove the element from the housing and allow the discs to separate to a stop on the core. The element can be cleaned in a bucket of water, by washing with a hose, or in a parts cleaner. Any shop cleaning agent or solvent can be used with the all-plastic elements.