978-264-0221 (fax)
info@kellerfilters.com
- Metalworking Products
PUMP/SKIMMERS TO REMOVE TRAMP OIL FROM COOLANT
FILTER CHIPS/FINES FROM COOLANT OR
CUTTING OILMETALWORKING ACCESSORIES
- Industrial Filtration Products
OIL/WATER SEPARATORS
COMPRESSED AIR PRODUCTS
- Company
- FAQs
- What information is required to specify a Keller Pump/Skimmer?
- What is the comparison between dedicated units and portable units?
- Can a Keller unit remove emulsified oil from the coolant?
- How long will coolant last in a machine if properly maintained?
- Why does Keller use only 1/2" air-operated diaphragm pumps on oil separators?
- Why does Keller not offer electric pumps as options?
- What are the disadvantages of a belt or disk skimmer compared to a Keller pump/skimmer?
- Reference Materials
In-Line Bag Filters To 1 Micron
IN-LINE BAG FILTERS REMOVE CHIPS & FINES FROM
CUTTING OIL OR COOLANT TO AS FINE AS 1 MICRON- In-line bag filters protect to-the-spindle, through-the-spindle and through-the-tool
coolant systems, preventing tool breakage & machine shutdowns
- Cleaning cutting oil or coolant greatly extends tool life
- Keller bag filters are easily installed in-shop in the oil or coolant lines
- Low cost, long life filter bags are easily replaced in a couple of minutes
Benefits of Filtering Cutting Oil or Coolant
Removing chips and fines from coolant or cutting oil before fluid enters the distribution manifold prevents blockage in the lines and spray nozzles and ensures that the desired fluid flow rate and distribution is maintained throughout the run. In addition, running with solids-free cutting fluid will increase tool life and minimize the requirement to shut down for machine adjustments and maintain dimensional specifications.
Advantages of Keller Bag Filters
Keller bag filter housings with felted polyester bags provide excellent solids holding capacity to ensure uninterrupted runs. Filter bags are easily changed without tools in a couple of minutes. The economical filter bags are available in ratings from 1 micron to 100 microns at the same prices. 25 micron bags are supplied as standard, or the customer may specify a different micron rating. The filter housings, available in 3/4" and 1-1/2" pipe sizes, are easily shop-installed downstream from the oil or coolant pump. Maximum operating pressure is 300 psig.
BA-0175 removes solids from coolant to prevent fouling of chiller package on Mazak machine.
BA-0475 removes solids from coolant line feeding spindle on Mazak machine.
Specifications and Ordering Information
Ordering Designation: BA-0475 BA-0175BA-0215 SB-0475Material of Construction Aluminum---------------------------------------------------------------------------- 304 Stainless Steel Flow capacity, gal/min 30 gpm 70 gpm 160 gpm 30 gpm Inlet/Outlet Ports 3/4" NPTF 3/4" NPTF 1-1/2" NPTF 3/4" NPTF Maximum Pressure 125 psig 125 psig 125 psig 300 psig Dimensions 5"D x 20"H 8"D x 24"H 8"D x 38"H 5"D x 20"H Shipping Weight 19 lbs 34 lbs 44 lbs 30 lbs Commercial Filter Bag Size #4 #1 #2 #4 Designation of Filter Bag RAP-xx RBP-xx RCP-xx RAP-xx Price [1] $795.00 $1195.00
$1395.00
$1595.00 
Note
[1]: Price includes tripod mounting stand, pressure
gage, and 5 filter bags.Replacement Filter Bags, box of 5: RAP-25*
(BA-0475, SB-0475)$35.00 RBP-25*
(BA-0175)$35.00 RCP-25*
(BA-0215)$50.00 *25
micron bags supplied as standard. Other micron
sizes available at same prices: 1, 5, 10,
50, 100
Click here for information on:
Magnetic Rod Inserts to greatly extend life of filter bags
In-line coolant filters with washable filter elements
- FAQs
