1-800-352-8422
978-264-0221 (fax)
info@kellerfilters.com
978-264-0221 (fax)
info@kellerfilters.com
- Metalworking Products
PUMP/SKIMMERS TO REMOVE TRAMP OIL FROM COOLANT
FILTER CHIPS/FINES FROM COOLANT OR
CUTTING OILMETALWORKING ACCESSORIES
- Industrial Filtration Products
OIL/WATER SEPARATORS
COMPRESSED AIR PRODUCTS
- Company
- FAQs
- What information is required to specify a Keller Pump/Skimmer?
- What is the comparison between dedicated units and portable units?
- Can a Keller unit remove emulsified oil from the coolant?
- How long will coolant last in a machine if properly maintained?
- Why does Keller use only 1/2" air-operated diaphragm pumps on oil separators?
- Why does Keller not offer electric pumps as options?
- What are the disadvantages of a belt or disk skimmer compared to a Keller pump/skimmer?
- Reference Materials
Information For Distributors
The Basics
As well as selling direct to end users, Keller sells to distributors at attractive discounts for resale. Distributor arrangements are non-exclusive, but Keller will protect individual customer accounts if notified by the distributor. There are no minimum stocking requirements. Keller will drop-ship to the customer at no additional charge at the request of the distributor. All products are shipped UPS, and most shipments are made from stock.
Two Ideal Distributor Products
Although all Keller metalworking fluid maintenance products are available for resale by Distributors, the two following product lines are ideal for Distributor sales because:-
They have applications in virtually all the shops that you now call on,
- They are easy to specify, install and operate, and
- They offer the best price/performance combination of any products on the market.
1) Keller TKO Pump/Skimmers for Individual Sumps
If a customer is thinking skimmers, he should be thinking Keller TKO Pump/Skimmers for individual sumps. Compared to a belt or disc skimmer, a TKO Pump/Skimmer offers: - Rugged high flow 1/2" air-operated pump which rapidly sweeps out the tramp oil, cleans and aerates the entire sump,
- Patented, permanent oil separating (coalescing) element, never needs changing.
- Compact inlet device can access any sump,
- Operates without problems even in sumps with high solids,
- No electricals, Easily setup in minutes by customer,
- Requires minimal operator attention
New! Magnetic frame instantly mounts
TKO to machine tool without hardware.
Ideal for space-conscious shops!Click here for complete information on TKO Pump/Skimmers
2) Keller Filters with Permanent Elements for Coolant Delivery Lines
Keller In-line filters protect to-the-spindle, through-the-spindle, and through-the-tool coolant systems, preventing tool breakage & machine shutdowns, with the following advantages: - Keller permanent filter elements never need replacement--Inexpensive to purchase, no replacement parts
- Keller permanent filter elements have superior solids holding capacity, far better than screens or disposable filters
- Keller filters are easily installed in-shop in the coolant lines
- Available with stainless steel or plastic housings for line sizes up to 2" and pressures to 300 psig
Click here for complete information on Keller In-Line Coolant Filters
Keller XS075-2130 with permanent filter element is easily installed in-shop in the coolant delivery system.
Keller Distributor Products
In addition to the two product areas featured above, Keller offers a broad range of filters and separators to meet any requirement to clean coolant or cutting oil--in fact, supplying products to maintain metalworking fluids is our only business.
A Distributor can be assured that the price/performance
combination of any Keller product line will never be
matched by any competitive products!
Click here for complete Guide to Keller product lines
Contact Us:
Jon Strauss, Sales Manager
Tel 800-352-8422 or 978-264-1911
Fax 978-264-0221,
Email: kellerinfo@aol.com
Website: www.kellerproducts.net
- FAQs
